• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Disposal
• Obey the local recycling requirements and applicable
regulations.
•
Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Jonsered dealer or discard it at a recycling location.
Technical data
LM 2146M
Engine
Brand Briggs & Stratton
Displacement, cm
3
125
Speed, rpm 2900 +/- 100
Nominal engine output, kW
1
1.8
Ignition system
Spark plug QC12YC
Electrode gap, mm 0.5
Fuel and lubrication system
Fuel tank capacity, litre 1.0
Oil tank capacity, litre 0.5
Engine oil
2
SAE 30/SAE 10W-30
Weight
With empty tanks, kg 17
Noise emissions
3
Sound power level, measured dB (A) 96
Sound power level, guaranteed L
WA
dB (A) 95
Sound levels
4
Sound pressure level at the operator's ear, dB (A) 81
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manufacturer’s man-
ual and select the best viscosity based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
4
Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB (A).
12 897 - 002 - 26.09.2018