Jonsered LM 2150 SM User Manual

LM 2150 SM
EN Operator's manual 5-13
BG Ръководство за експлоатация 14-23
CS Návod k použití 24-32
DA Brugsanvisning 33-41
DE Bedienungsanweisung 42-52
EL Οδηγίες χρήσης 53-62
ES Manual de usuario 63-72
ET Kasutusjuhend 73-81
FI Käyttöohje 82-90
FR Manuel d'utilisation 91-100
HR Priručnik za korištenje 101-109
HU Használati utasítás 110-118
IT Manuale dell'operatore 119-128
LT Operatoriaus vadovas 129-137
LV Lietošanas pamācība 138-146
NL Gebruiksaanwijzing 147-156
NO Bruksanvisning 157-165
PL Instrukcja obsługi 166-175
PT Manual do utilizador 176-185
RO Instrucţiuni de utilizare 186-195
RU Руководство по эксплуатации 196-206
SK Návod na obsluhu 207-215
SL Navodila za uporabo 216-224
SV Bruksanvisning 225-233
UK Посібник користувача 234-243

Jonsered LM 2150 SM Specifications

General

Brand	Jonsered
Model	LM 2150 SM
Category	Lawn Mower
Language	English

Summary

Introduction

Product Description and Overview

Details the lawn mower's features, components, and intended use.

Safety Symbols and Warnings

Explains safety symbols and general warnings for operation and maintenance.

Product Liability

Safety

Safety Definitions

Explains the meaning of WARNING, CAUTION, and NOTE.

General Safety Instructions

Provides general safety guidelines for using the product.

Work Area Safety

Safety precautions concerning the operating environment.

Work Safety

Safety instructions related to the operation and general work practices.

Safety Instructions for Operation

Personal Protective Equipment (PPE)

Recommends PPE like boots, pants, and gloves for safe operation.

Safety Devices and Checks

Instructions for checking safety features like cutting cover, engine brake, and muffler.

Fuel Safety

Guidelines for safe handling and storage of fuel.

Assembly

Handle and Starter Rope Assembly

Steps for assembling the handle and starter rope.

Transport Position and Mulch Plug

How to set for transport and install the mulch plug.

Operation

Pre-Operation Checks

Important steps before operating the product.

To Fill the Fuel

To Set the Cutting Height

To Start the Product

To Stop the Product

To Get a Good Result

Maintenance

Maintenance Schedule

Overview of maintenance tasks and their intervals.

To Do a General Inspection

To Clean the Product Externally

To Clean the Inner Surface of the Cutting Cover

To Examine the Cutting Equipment

To Replace the Blade

Step-by-step guide for removing and installing the mower blade.

To Check the Oil Level

To Change the Engine Oil

To Clean the Air Filter

To Examine the Spark Plug

To Examine the Fuel System

Transportation and Storage

Disposal

Technical Data

EC Declaration of Conformity