Jonsered LM2146C Li58-52 - Page 15

unit LM2146C Li58-52
(58VBKJN46C
)
LM2146CA Li58-52
(58VBKJN46CR)
Motor type — BLDC (brushless) 58V BLDC (brushless) 58V
Motor speed – ECO mode rpm 2300 2300
Motor speed – Auto mode rpm 2500 RPM until current is
greater than 12A for 3 seconds
RPM increases to 2800 RPM
until current is less than 18A for
10 seconds.
2500 RPM until current is
greater than 12A for 3 sec-
onds RPM increases to 2800
RPM until current is less than
18A for 10 seconds.
Motor speed – Boost mode rpm 2800 2800
Motor output – Max. kW 1.5 1.5
Motor output – Max Continuous kW 0.9 0.9
Motor output – Rated kW 0.9 0.9
Overcurrent limit (Max Current) A (amps) 25 25
Weight
Weight (without battery) kg 23.5 24.5
Battery
Type of battery 590923813 590923813
Battery runtime
Battery runtime m
2
Up to 1200 Up to 1000
Noise emissions
1
Sound power level, measured dB (A) 87 87
Sound power level, guaranteed
LWA
dB (A) 87 87
Sound levels
2
Sound pressure level at the opera-
tor's ear
dB (A) < 80 < 80
Vibration levels
3
Handle m/s
2
0.65 0.65
Cutting
Cutting height mm 30-80 30-80
Cutting width cm 46 46
Blade, collect — 581188910 581188902
1
Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive
2000/14/EC.
2
Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB (A).
3
Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
. Vibration
standard EN 60335-2-77:2017 chapter 20.105.
851 - 003 - 23.10.2018 15