Jonsered LM2146C Li58-52 - INTRODUCTION; Overview; Symbols on the product

Contents
INTRODUCTION............................................................ 6
SAFETY..........................................................................
7
ASSEMBLY..................................................................10
OPERATION................................................................ 10
MAINTENANCE........................................................... 12
TRANSPORTATION AND STORAGE.........................14
TECHNICAL DATA...................................................... 14
CONTENTS OF THE EC DECLARATION OF
CONFORMITY..............................................................16
INTRODUCTION
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1 )
1. Operator presence control bar
2.
Grass catcher
3. Drive levers
4. Electrical powerhead
5. Cutting height lever
6. Battery charger
7. Operator's manual
8. User control interface
9. Battery pack
10. Battery cover
11. Power button
12. Cutting mode button
13. Rear door
14. State of charge lights
15. Key
16. Mulch plug
Symbols on the product
(Fig. 2 ) Warning
(Fig. 3 ) Read this manual
(Fig. 4 )
Please read the operator's manual carefully
and make sure that you understand the
instructions before use.
(Fig. 5 ) Use approved eye protection
(Fig. 6 ) Use approved hearing protection
(Fig. 7 ) Use approved head protection
(Fig. 8 ) Use approved hearing protection
(Fig. 9 )
Warning: rotating blade. Keep hands and
feet clear.
(Fig. 10 )
Keep hands and feet away from rotating
blades. Do not open or remove the
protective shields while the engine or motor
runs.
(Fig. 11 )
Before and while walking rearward, look
behind and down for small children, animals
or other risks that can cause you to fall.
(Fig. 12 ) Look out for thrown objects and ricochets.
(Fig. 13 )
Keep persons and animals at a safe
distance from the work area.
(Fig. 14 ) Slope hazard
(Fig. 15 ) Electrical shock
(Fig. 16 )
Remove the key before repair, adjustment,
set-up or transport.
(Fig. 17 ) Power button
(Fig. 18 ) Motor on
(Fig. 19 ) Motor control handle engaged
(Fig. 20 ) Motor off
(Fig. 21 ) Motor control handle disengaged
(Fig. 22 )
The product or packaging cannot be
handled as domestic waste. The product
and packaging must be submitted to an
appropriate recycling station for the recovery
of electrical and electronic equipment.
(Fig. 23 )
Do not leave, store or use in the rain or in
wet conditions.
(Fig. 24 ) Recycle
(Fig. 25 ) Sound power level
6 851 - 003 - 23.10.2018