To Next PageTo Next Page
Need help?Do you have a question about the Jonsered LT 2313 A and is the answer not in the manual?
General| Engine manufacturer | Briggs & Stratton |
|---|---|
| Engine name | Intek |
| Fuel tank volume | 5.7 l |
| Transmission type | Automatic |
| Cutting width | 97 cm |
| Cutting height min | 38 mm |
| Cutting height max | 102 mm |
| Blade engagement | Manual |
Read instructions, understand controls, and learn safety precautions for proper equipment use.
Reduce fire risk, inspect for debris, wear proper footwear, and clear mowing area of objects.
Operate in daylight, avoid slopes over 15°, be aware of terrain, and never carry passengers.
Keep machine secure, store fuel safely, cool engine, keep engine free of debris, check grass catcher, replace worn parts.
Warns about child injuries and recommends minimum operating ages for equipment use.
Lists and identifies parts that need to be assembled before tractor use.
Instructions for assembling the steering wheel, shaft, and related components.
Steps for installing and adjusting the operator's seat for optimal comfort and control access.
Guide for installing the battery, connecting terminals, and initial charging.
How to install the mulcher plate or convert the mower deck for bagging/discharging.
Overview of the location and function of all major controls on the tractor.
Regulates engine speed and blade rotation for optimal cutting.
Used for braking the tractor and starting the engine.
Controls tractor speed and direction (Forward, Neutral, Reverse).
Lever for connecting/disconnecting and quick lifting/lowering the cutting unit.
Controls engine starting, running, and stopping.
Engages and disengages the brake to keep the tractor stationary.
Allows towing or moving the tractor without the engine.
Used to assist in starting a cold engine.
Instructions for safely filling the fuel tank with unleaded petrol, including fire prevention.
How to check and maintain the correct engine oil level.
Importance of proper tire inflation for mower performance and safety.
Steps to safely start the tractor engine using the ignition key and throttle.
Procedures for starting in cold weather and purging the transmission.
How to engage and use the Reverse Operation System for mowing in reverse.
How to lower and connect the cutting deck for mowing.
Choosing appropriate speed for terrain conditions and desired cutting results.
Advice on mowing for best results, including cutting wet grass and cleaning.
Safe procedures for stopping the tractor engine and removing the ignition key.
Important safety warnings and procedures before performing maintenance or adjustments.
Instructions for cleaning the machine, including the steering plate.
Step-by-step guide for draining and refilling the engine oil.
Solutions for engine not starting or starter motor issues.
Addresses problems like uneven running, weak power, overheating, and battery not charging.
Diagnosing and fixing issues causing vibration or poor cutting quality.
Steps for preparing the tractor for storage at the end of the mowing season, including cleaning and fluid changes.
Information required when ordering replacement parts for service.
