Need help?Do you have a question about the Jonsered FR2312M and is the answer not in the manual?
General| Displacement | 344 cc |
|---|---|
| Transmission | Manual |
| Cylinders | 1 |
| Fuel Capacity | 5.7 l |
| Tire Size - Front | 15x6-6 |
| Tire Size - Rear | 18x8.5-8 |
| Engine Type | Briggs & Stratton Intek |
| Speeds | 6 forward, 2 reverse |
| Hydraulic System | No |
General safety guidelines and precautions for personnel performing repairs and maintenance on the product.
Specific safety advice regarding hazardous properties of fuel, use of compressed air, and handling of tensioned springs.
Procedures and schedules for maintenance tasks to be performed by dealers at various service intervals.
Comprehensive maintenance schedule detailing tasks based on operating hours and time intervals.
Guidelines for dealers regarding product delivery, customer satisfaction, and building brand reputation.
Instructions for handling and unpacking the product safely and checking for transport damage.
List of components and manuals that are included in the product's transport box.
Safety precautions and procedures for handling the vehicle's battery and measures after acid contact.
Step-by-step instructions for connecting jump leads to start the engine with a weak battery.
Procedure for fitting and securing the steering wheel and steering column to the machine.
Detailed steps for checking and topping up the engine oil correctly, including oil type recommendations.
Information regarding the correct tire pressure for all wheels and its effect on cutting height.
Overview of the product's features, including articulated steering and front-mounted cutting unit.
Guidance on locating and identifying the machine, engine, and transmission serial numbers for spare parts.
Details on the one-cylinder, air-cooled Briggs & Stratton engine, including maintenance and repair information.
Explanation of the articulated steering system, how force is transferred, and its benefits for maneuverability.
Description of the hydrostatic transmission system that provides variable speed control.
Information about the front-mounted cutting unit, its width, and mulching capabilities.
Step-by-step instructions for safely disconnecting components and removing the engine from the machine.
Procedures for the removal and assembly of the fuel tank, including draining and refilling.
Guidelines for changing engine oil based on operating hours and conditions, including safety warnings.
Method for checking cable tension and adjusting steering cables for proper alignment and function.
Detailed steps for removing old steering cables and installing new ones, ensuring correct routing.
Procedure for the removal and fitting of the steering shaft assembly, including bearings and chain.
Guide for the removal and assembly of the steering cable pulley, including bearing replacement.
Steps to check and adjust the brake cable for correct tension, ensuring proper braking ability.
Procedure for checking and adjusting the clutch cable for optimal engagement and disengagement.
Method for checking and adjusting the accelerator cable and pedal linkage for correct throttle response.
Instructions for replacing the bearing used in the articulated steering mechanism.
Steps to remove the pivoting rear axle assembly, including related components and cables.
Guide for replacing the bushings located in the rear frame associated with the pendulum shaft.
Process for replacing bearings within the belt pulleys of the articulation unit.
Steps for reassembling the pivoting rear axle, ensuring correct placement of parts and cables.
Detailed instructions for removing and fitting the hydrostatic transmission cable.
Procedures for removing the old brake cable and fitting a new one.
Guide for replacing belt 4, which connects to the cutting unit.
Instructions for replacing belt 3, which drives the cutting unit.
Steps for safely detaching the cutting unit from the machine for cleaning and servicing.
Method to place the cutting unit in a service position for easier maintenance and cleaning.
Guide for safely removing the cutting unit's blades and blade housing assembly.
Procedure for sharpening and balancing the cutting blades to ensure proper function and safety.
Visual representation of the machine's electrical system, showing component connections.
Overview of the electrical system's parts, including microswitches and ignition switch, for troubleshooting.
Procedure for removing and installing the ignition and starter switch assembly.
Information on locating, checking, and replacing the main fuse to protect the electrical system.
To Next Page
