EasyManua.ls Logo

Jonsered FR2312M - Technical Data

Jonsered FR2312M
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English – 5
Technical data
3 Technical data
Dimensions
Length without cutting unit, mm/ft 1781/5.84
Length with cutting unit, mm/ft 2100/6.89
Width without cutting unit, mm/ft 797/2.60
Width with cutting unit, mm/ft 883/2.90
Height, mm/ft 1084/3.56
Service weight with cutting unit, kg/lb 191/421
Wheelbase, mm/ft 800/2.62
Tire dimension 155/50-8
Air pressure rear - front, kPa (bar/PSI) 60 (0.6/8.5)
Max. permitted slope 10°
Engine
Make/Model Briggs & Stratton/3115
Rated output, kW (see note 1) 6.4
Stroke, cm
3
/cu.in 344/21
Max. engine speed, rpm 3000 ± 100
Fuel, minimum octane rating unleaded 85
Volume, fuel tank, liters 4
Oil, grade SJ-CF SAE 10W/30
Oil tank capacity, liters/USqt 1.4/1.5
Start Electric starter
Electrical system
Type 12V, negative ground
Battery 12V, 20 Ah
Spark plug Champion XC92YC
Electrode gap, mm/inch 0.75/0.030
Main Fuse Flat pin, 15 A.
Noise emissions and cutting width
(see note 2)
Noise power level, measured dB(A) 99
Noise power level, guaranteed dB(A) 100
Cutting width, cm/inch 85/33.5
Noise levels
(see note 3)
Noise pressure level at user's ear, dB(A) 85
Vibration levels
(see note 4)
Vibration level in steering wheel, m/s
2
1.6
Vibration level in seat, m/s
2
0.7

Table of Contents

Related product manuals