6 – English
Technical data
Transmission
Make Tu Torq T36P
Oil, grade SF-CC SAE 20W/50
Number of forward gears -
Number of reverse gears -
Forward speed, km/h 0-8
Reverse speed, km/h 0-8
Cutting unit
Type Z 85
Cutting heights, 5 positions, mm/inch 25-70 / 1-2 3/4
Blade length, mm/inch 430/17
Note. 1: The power rating of the engine is the average net output (at the specied rpm) of a typical production engine of the
model, measured to SAE standard J1349/ISO1585. Mass production engines may dier from this value. The actual power
of the engine mounted in the nal
product depends on operating speed, surroundings and other factors.
Note. 2: Emission of noise to the surroundings measured as sound power (LWA) in accordance with the EU directive
2000/14/EC.
Note. 3: Sound pressure level according to EN 836. Reported data for the noise pressure level has a typical dispersion
(standard deviation) of 1.2 dB(A).
Note. 4: Vibration level according to EN 836. Reported data for the vibration level has a typical dispersion (standard
deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
Tightening torques
Steering cable pulley 57-61 ft/lb (28-32 Nm) 21-24 lbft
Blade belt pulley 57-61 ft/lb (45-50 Nm) 32-36 lbft
Blade 57-61 ft/lb (45-50 Nm) 32-36 lbf
Belt tensioner 57-61 ft/lb (15-25 Nm) 10-18 lbft
Engine mounting screws 57-61 ft/lb (20-25 Nm) 14-18 lbft (M8 8.8 = 24Nm)
Gearbox mounting screws 57-61 ft/lb (20-25 Nm) 14-18 lbft (M8 8.8 = 24Nm)
Engine belt pulley 52 ft/lb (70 Nm) 50 lbft
Play
Clutch wire: 4 - 6 mm (0.16" - 0.23")
Brake lever to stop: 0 - 1 mm (0 - 0.040")
Brake lever: 7 - 9 mm (1/4" - 3/8")
Brake cable: 1 mm (0.040")
Hydrostat pedal wire: 0 mm
To Next Page
Loading...
