Need help?Do you have a question about the Jonsered LT2218A and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Transmission Type | Automatic |
| Cutting Width | 107 cm |
| Cutting Height, min-max | 38-102 mm |
| Cutting Height Steps | 6 |
| Blade Engagement | Manual |
| Engine Displacement | 500 cm³ |
| Turning Radius | 30 cm |
| Tire Size Front | 6.5 inches |
| Tire Size Rear | 18x8.5-8" |
Read, understand, and follow all instructions on the machine and in the manual before starting operation.
Understand the hazards related to loss of control and tip-over accidents when operating on slopes.
Recognize tragic accidents that can occur if the operator is not alert to the presence of children.
Follow manufacturer's recommendations for weight limits and towing on slopes.
Understand safe handling of gasoline and general service recommendations.
Lists the necessary tools for assembling the tractor and its components.
Instructions for unpacking the tractor and removing it from its shipping carton.
Step-by-step guide for attaching the steering wheel assembly to the tractor.
Instructions for mounting the tractor seat onto the seat pan, including connecting the switch.
Procedure for safely removing the assembled tractor from its shipping skid.
Checks for tire pressure, deck levelness, belt position, and brake system.
A comprehensive checklist to ensure all assembly steps are completed before operating the tractor.
Familiarize yourself with the locations and functions of the tractor's controls and adjustments.
Covers setting the parking brake, stopping, throttle control, and movement.
Steps for adjusting cutting height, gauge wheels, and operating the mower.
Understanding the Reverse Operation System and its safety implications.
Guidance for operating on slopes, using ROS, and preparing for transport.
Procedures for starting the engine, including warm/cold weather and purging the transmission.
Advice and best practices for efficient and effective mowing.
Schedule of tasks, general advice, pre-use checks, and lubrication guide.
Covers maintenance for brakes, tires, operator presence system, and blades.
Information on transaxle cooling, V-belts, engine lubrication, and oil changes.
Maintenance for cooling system, air filter, muffler, spark plugs, and fuel filter.
Detailed instructions for removing and installing the mower deck.
Procedures for adjusting the mower deck for optimal cutting performance.
Steps for replacing the mower blade drive belt and motion drive belt.
Procedure to verify the tractor's braking performance and adjust if necessary.
Service for steering alignment, front wheel settings, and wheel removal.
Procedures for weak battery starting and battery replacement.
Instructions for removing hood/grill and replacing headlight bulbs.
Troubleshooting interlocks/relays and replacing the fuse.
Service for transmission removal/replacement and engine control adjustments.
Steps to prepare the tractor and engine for long-term storage.
Instructions for properly storing the tractor's battery to prevent damage.
Identifies causes and corrections for engine starting failures.
Troubleshooting for loss of power and excessive vibration.
Addresses issues like poor cut, blades not rotating, and loss of drive.
Identifies causes and solutions when the tractor's battery fails to charge.
To Next Page
