ENGINE
Manufacturer Briggs & Stratton
Type 44T877
Power
24 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 3-1/2 gallons 13,25 litres
Cooling Air cooled
Air lter Cyclonic
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Hydrostatic transaxles
Steering control Dual levers, foam gripped
Speed forward 0-6.5 mph 0-10,5 km/h
Speed reverse 0-3.5 mph 0-5,6 km/h
Brakes Mechanical
Front caster tires 11 x 6-5
Rear tires, turf pneumatic 18 x 9.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 48" 122 cm
Cutting Height 1-1/2 - 4" 3,8 cm - 10,2 cm
Number of Blades 3
Blade Length 16-1/4" 42 cm
Nose Roller Yes
Anti-scalp Rollers 3 Adjustable
Seat Standard
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement Ogura 90 ft/lb Clutch
Deck Construction 11 gauge fabricated
Productivity 2.5 acres/h
10,117 m
2
/h
DIMENSIONS
Weight 595 lbs 270 kg
Base Machine Length
75" 191 cm
Base Machine Height 40" 102 cm
Base Machine Width
44" 111 cm
Overall Width, Chute Up 48" 122 cm
Overall Width, Chute Down
60" 152 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
33
TECHNICAL DATA