USER GUIDE
17
5. Adjust the red ame lever and the blue water ow dial to
nd your desired temperature and ow rate.
For higher temperatures, turn the ame up and the
water ow down.
For lower temperatures, turn the ame down and the
water ow up.
4. You can now control the entire system at the shower handle
switch. Flick it on: the water starts to ow and the Hottap
burner automatically ignites. Flick it o: the water ow stops
and the Hottap burner automatically extinguishes.
Bearing in mind that the water might be very hot, stand clear of
the shower when turning it on.
Hottap operation
To Next Page
Loading...
