Doll or Stuffed Toy Booster Seat Instruction Manual
Page 3
Assembling and Using your Doll
Booster Seat
To insure safe operation of your doll booster, please follow these instructions
carefully.
Unpacking the Product
• Carefully remove doll booster from the box and plastic bag.
• Discard all packaging materials properly. Do not allow children to play with
them.
Positioning the Shoulder Straps
• Place doll or stuffed toy in doll booster on top of the safety harness.
• Determine which pair of shoulder harness slots is even with or just above the
doll’s shoulders. DO NOT use upper harness slots if they are below the doll’s
shoulders. They will not hold the doll securely in a sudden stop or crash.
• If the shoulder straps need to be adjusted, remove doll from booster.
• From the back of the booster, unthread harness straps from the sliding
buckle. REMEMBER THE CORRECT ROUTING OF THE STRAPS.
• Remove the straps from slots in the seat and re-route them through the
desired slots, making sure they are not twisted.
• Rethread the straps through the buckle.
• Check that straps are secure by pulling on harness straps from the front.
Securing Doll in the Booster
• Unbuckle the harness by pressing the button in the center of the buckle. See
Figure 1.
• Open the harness clip by pressing the button and unbuckling the clip. See
Figure 2.
• Place the doll in the booster with the shoulder straps over its shoulders and
chest. Then place the crotch strap between the doll’s legs.
Figure 1 Figure 2
To Next Page
Loading...
Need help?
General