Joovy Kooper X2 User Manual

6 7
Parts List
Stroller
Tray
Front
Wheels (2)
Rear
Wheels (2)
Stroller Assembly
IWARNING: Adult assembly is required for this product. No
tools required.
Unfolding the Stroller
• Orient the stroller with the handle facing upward. Release the safety latch located on the left side
of the stroller. (1)
• Pull upwards on the handle. (2) Keep pulling until the stroller is fully erected and the folding hinge
on each side engages.
• Visually check and gently push downward on the handle to ensure that the stroller is completely
opened and locked before ANY use of the product.
IWARNING: Keep children away from stroller while
unfolding. ALWAYS ensure the folding mechanism on each side of the
handlebar is fully engaged when the stroller is in the opened position. This
action will prevent collapse of the stroller. Possible pinching hazard – Be
careful when unfolding the stroller.
Installing/Removing the Front Wheels
• Slide one front wheel into the front wheel housing until it clicks into place. (3) Repeat for the other
two wheels. Pull on the wheels to ensure they are installed properly.
• To remove, press the metal release button on the back of the front wheel housing and pull away
from the stroller. (4)
3 4
21

Joovy Kooper X2 Specifications

General

Maximum Weight Capacity	50 lbs per seat
Stroller Type	Double stroller
Harness Type	5-point harness
Number of Seats	2
Recline Positions	Multiple
Canopy	Extra-large, UPF 50