Need help?Do you have a question about the Joovy Scooter X2 and is the answer not in the manual?
General| Stroller Type | Double stroller |
|---|---|
| Harness Type | 5-point harness |
| Number of Seats | 2 |
| Frame Material | Aluminum |
| Parent Cup Holder | Yes |
| Child Tray | No |
| Weight Capacity | 90 lbs |
| Stroller Weight | 32 lbs |
| Canopy | Yes, with peek-a-boo windows |
| Storage | Large basket underneath |
| Weight Capacity (per seat) | 45 lbs |
| Seat Width | 12.5" |
| Seat Depth | 10 inches |
| Recline Positions | Adjustable, near flat |
| Wheel Size | 7" front, 9.5" rear |
Remove stroller and all parts from the box and plastic bag. Identify all components.
Orient the stroller, release the lock, and pull the handlebar up until the stroller is fully opened and latched.
Install the rear axle and brake set onto the stroller legs, then attach rear wheels using washers and snap pins.
Engage the rear wheel brakes by pushing down on the brake levers or connecting bar.
Position the stroller, insert front wheel sets into plastic posts until they click, and pull outward to secure.
Set front wheels to locked mode by pushing up the locking tab until it clicks; push down to unlock.
Adjust seatbacks from upright to reclined using the recline mechanism on the seat backside.
Place leg supports down by squeezing triggers; pull up to lock in horizontal position.
Attach bumper bar by inserting fittings into seat mounts until they click; remove by pressing underside buttons.
Slide canopy locks onto fittings, push down firmly, and attach Velcro. Adjust canopy positions as needed.
Adjust harness height, attach buckles, and tighten waist belt to secure the child safely in the seat.
The storage basket has a maximum weight capacity of 5 lbs. It can be removed if desired.
Recline seatbacks fully, squeeze fold mechanism, and rotate forward to collapse the stroller.
Clean fabric with mild soap and water; frame and wheels with mild detergent. Allow to air dry.
To Next Page
