Joovy Kooper X2 User Manual

14 15
27 35
28 3629 37
30
26 34
31
33
Seat Fabric
• The seat fabric is removable for washing.
• Adjust the leg supports to the upright position.
• Undo the snaps and Velcro® along the canopy apron. (26 and 27)
• Unfasten the seat fabric from the two pegs on the side seat panel. (28) Repeat for the other side.
• Release the strap from the metal D-ring on the folding hinge. (29) Repeat for the other side.
• Unfasten the seat fabric from the peg beneath the side of each seat. (30) Repeat for the other side.
• Release the strap from the plastic D-ring beneath each seat. (31)
• Undo the Velcro® beneath the footrests and pull the seat fabric free from the stroller frame. (32)
• Remove the shoulder and waist straps by turning the plastic ends sideways and pushing them
through the slots in the seatback. (33 and 34)
• Remove the crotch strap by turning the plastic end sideways and pushing it through the slot in the
fabric. (35)
• Open the zipper pocket at the back of each seat. Remove the plastic board. (36)
• Open the Velcro® pocket underneath each seat. Remove the plastic board. (37)
• The seat fabric is ready for washing.
• To reassemble, simply reverse the disassembly steps.
• Ensure all zippers, snaps, and straps are securely closed.
32

Joovy Kooper X2 Specifications

General

Maximum Weight Capacity	50 lbs per seat
Stroller Type	Double stroller
Harness Type	5-point harness
Number of Seats	2
Recline Positions	Multiple
Canopy	Extra-large, UPF 50