EasyManua.ls Logo

JOPIX MARINE 515P - User Manual

JOPIX MARINE 515P
55 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Español
TRANSCEPTOR PORTATIL
MARINO VHF/FM
MANUAL
DE
INSTRUCCIONES
J
J
O
O
P
P
I
I
X
X
M
M
A
A
R
R
I
I
N
N
E
E
5
5
1
1
5
5
P
P
Homologado por la DGMM nº: 54.0135

Table of Contents

Questions and Answers

  • A
    Amber HernandezAug 9, 2025
    Why is there no sound from the loudspeaker on my JOPIX MARINE 515P Transceiver?
    • R
      robert39Aug 10, 2025
      There might be several reasons for this: * The squelch level might be too high. Try setting a suitable squelch level. * The volume level could be too low. Adjust the volume by pushing the [VOL] key, then use the [?] / [?] keys. * The speaker may have been exposed to water. If so, discharge the water from the speaker grill.
  • M
    msandersAug 15, 2025
    What to do if my JOPIX Transceiver does not transmit with high power?
    • O
      odayAug 15, 2025
      If your JOPIX Transceiver isn't transmitting at high power, it could be due to several factors: * Some channels are limited to low power transmitting. Try switching to channels without output power limits. * The battery might be exhausted. Recharge the battery pack. * The output power may be set to low. Push the [H/L] key to select high output power. * You might be working in weather channel or CH 70. Quit weather channel or CH 70.
  • L
    lfordAug 19, 2025
    What to do if my JOPIX MARINE 515P Transceiver cannot be turned on?
    • J
      Jessica TorresAug 19, 2025
      If your JOPIX Transceiver won't turn on, the issue might be: * The battery is exhausted. Recharge the battery pack. * The battery pack is not correctly inserted. Make sure to correctly insert the battery pack.
  • T
    taylorronaldAug 25, 2025
    What to do if scan does not start on JOPIX Transceiver?
    • K
      Kaitlyn BuchananAug 25, 2025
      If the scan function on your JOPIX Transceiver isn't starting, it may be because no TAG channels are set. Set desired channels as TAG channels.
  • E
    Emily GoodmanAug 29, 2025
    How to unlock channels on JOPIX MARINE 515P Transceiver?
    • D
      Dr. Abigail GrantAug 29, 2025
      If the channel on your JOPIX Transceiver cannot be changed, the keypad lock function may be enabled. Hold the [LOCK] key for 1.5 seconds to turn off the function.
  • C
    Christopher BatesSep 4, 2025
    Why I cannot communicate on the same channel using JOPIX Transceiver?
    • D
      Dwayne WarnerSep 4, 2025
      If you cannot communicate on the same channel with your JOPIX Transceiver, it might be because: * It is a duplex channel. Choose another channel. * You are working in a self-set channel group. Set the channel frequency to be the same.

JOPIX MARINE 515P Specifications

General IconGeneral
Output Power25W / 1W
ModulationFM
Power Supply13.8V DC
Weight1.2 kg
Channels55 International channels

Related product manuals