OPERATION INSTRUCTIONS
Place scale on a flat surface prior to use.
Please note: Touch-sensitive buttons – press gently.
To weigh:
1. Press the ZERO / key. All display figures will appear before
setting to zero.
2. Press the UNIT key to select the units required.
3. Place item to be weighed carefully onto scale.
4. To turn off the scale, press and hold the ZERO / key.
Add & Weigh function:
Press the ZERO / key, after 1 second the LCD will display 0g
(see Figure 1).
Overload:
SwitchScale™ can measure accurately up to 5250g. When the
weight exceeds
5250g the LCD will show the overloading display (see Figure 2).
ADDITIONAL INFORMATION
• This scale is not waterproof. Do not expose to moisture.
• Before use, make sure your scale is at room temperature and
on a stable, horizontal surface, free of vibration.
• Store your scale in a clean, dry location. Dust, dirt and
moisture can accumulate on the weighing sensors and
electronics causing inaccuracy or malfunction.
• Gently place all items to be weighed. Do not drop items onto
the scale.
Figure 1
Figure 2
To Next Page
Loading...
Need help?
General