Doc.No.: 08400-006-DE
Page 12 of 19
.
5.5. HEADSET (TYPE 9010) OPERATION
5.5.1. Make a call out from the telephone to another station
- Put the headset on, with the microphone close to your mouth.
- Select the line by means of the line selector (not applicable to 4050/4051),
- Crank the generator (on the telephone) 3-5 turns.
- When the call is answered, press the PTT -switch temporary on to talk or push it
in/upwards for locked operation (handsfree).
- After the conversation, release the PTT-switch. From locked position press the button
downwards.
5.5.2. Answer a call from another station
- Put the headset on, with the microphone close to your mouth.
- Press the PTT -switch temporary on to talk or push it in/upwards for locked operation
(handsfree).
- After the conversation, release the PTT-switch. From locked position press the button
downwards.
- Replace the headset to its stowage position
ON/OFF HOOK HANDSET MOTION: