Need help?Do you have a question about the jotron Tron AIS-SART and is the answer not in the manual?
General| Frequency | 9 GHz |
|---|---|
| Output Power | 1 W |
| Operating Temperature | -20°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Power Output | 1W |
| Standard | IEC 61097-14 |
Details the components of the transmitter module, including the main board, antenna, and screen boxes.
Describes the battery module, its components, and how to identify the battery expiry date from the label.
Lists the four items included in the bottom lid of the Tron AIS-SART unit.
Explains the function of the green and red LED indicators and the buzzer for operational status and faults.
Details the two available mounting bracket types: wall bracket and lifeboat bracket.
Instructions for mounting the wall bracket, emphasizing vertical position for easy access in emergencies.
Instructions for mounting the lifeboat bracket vertically and high on a lifeboat, noting specific requirements for freefall lifeboats.
Describes alternative mounting methods for the AIS-SART on lifeboats/liferafts without using a bracket.
Instructions on how to use the lanyard to hang the Tron AIS-SART inside a liferaft, with a caution about metal objects.
Details how to attach the Tron AIS-SART to an inflatable canopy using the liferaft mounting strap.
Explains how to use a telescopic pole to extend the height of the Tron AIS-SART for better visibility.
Step-by-step guide for disassembling the battery module to prepare for replacement.
Step-by-step guide for assembling the battery module after replacement, including connecting cables and sealing.
Step-by-step instructions on how to activate the Tron AIS-SART for use in an emergency.
Instructions for deactivating the Tron AIS-SART after use.
Explains how the AIS-SART's signal is displayed on other vessels' AIS transponders and electronic charts.
Describes how a non-AIS-SART compliant transponder displays the SART ACTIVE message and vessel information.
Details how a non-AIS-SART compliant Electronic Chart System (ECS) or ECDIS displays the SART ACTIVE message.
Explains how an AIS-SART compliant transponder displays SART TEST, including ID, range, bearing, and position.
Describes the special symbol and text message displayed on ECS/ECDIS for an AIS-SART compliant device.
Procedure for testing the Tron AIS-SART, ensuring battery capacity and operational readiness for emergencies.
Identifies error codes indicated by red LED flashes during self-test, aiding in fault diagnosis.
Describes how to test the reception and visibility of the AIS-SART on other vessels' displays and systems.
Guidelines for storing the product in a cool, well-ventilated area and precautions for handling lithium batteries.
Information on special packing instructions and transportation regulations for the product.
Lists key product specifications such as battery type, capacity, materials, dimensions, and operating conditions.
Provides technical details for the radio transmitter, including frequency, radiated power, and antenna pattern.
Details the materials and dimensions for both the wall bracket and the lifeboat bracket.
Specifies the materials and dimensions for the wall bracket assembly.
Specifies the materials for the lifeboat bracket assembly.
Guidance on finding Jotron partners and distributors for service and support.
To Next Page
