What to do if my jotron Tron TR20 GMDSS TR20 GMDSS is not responding to a signal?
If your Jotron Radio TR20 GMDSS isn't responding to a signal, it might be due to squelch muting. Try adjusting the squelch to 0. If the problem persists, there may be a failure in the receiver, and an authorised agent must service the unit.
Why is my Jotron Radio TX indicator on, but communication is impossible?
If the TX indicator is on during transmitting on your Jotron Radio, but communication is impossible, you may be using the wrong channel number. Ensure you are using the same channel number as the partner station.
How to fix 'E1' indication on my jotron Tron TR20 GMDSS display?
If 'E1' is indicated on the display of your Jotron Radio, it means the frequency synthesizer is out of lock. First, try resetting the radio by switching the power off and on again. If the problem persists, there may be a failure in the frequency synthesizer, and an authorised agent must service the unit.
What does 'E2' on my jotron Tron TR20 GMDSS Radio display mean?
If 'E2' is indicated on the display of your Jotron Radio, it signifies a failure in the transmitter. An authorised agent must service the unit.
Why is the battery indicator on my Jotron Radio showing only 30% after a full recharge?
If the battery indicator on your Jotron Radio shows only 30% after a full recharge, the battery indicator might be set to Lithium when a NiMH battery is in use. Change the setting to the correct battery type.
What to do if TX indicator is not responding during transmitting on jotron Tron TR20 GMDSS?
If the TX indicator is not responding during transmitting on your Jotron Radio, DW or TW may be enabled. Switch DW/TW off.
How to fix jotron Tron TR20 GMDSS when there is no indication on display?
If there is no indication on the display of your Jotron Radio, the battery is likely discharged. Charge or change the battery package.
Safety precautions for handling batteries, including keeping out of reach and dry, and first aid for contact.
Procedures for first aid in case of contact with battery contents, inhalation, or skin contact.
Specifies suitable and unsuitable extinguishing media for battery fires.
Safeguards and initial setup steps to ensure trouble-free performance of the TR20.
General technical specifications including frequency, channel spacing, temperature range, and battery life.
Step-by-step instructions for safely removing and replacing the battery in the TR20.
Details about the 9V / 2900mAh primary lithium battery, its type, and when it needs replacement.
Instructions for charging the secondary NiMH battery using the dual slot charger and estimated charging time.
Guide to configuring the TR20, including operation based on function keys and menus.
Explanation of Single, Dual Watch (DW), and Triple Watch (TW) modes for channel monitoring, noting increased power consumption for DW/TW.
Procedure for regularly testing the radio's operation, including steps for housing, battery, transmit, and communication checks.
A troubleshooting guide with common problems, possible causes, and solutions for the TR20 GMDSS, covering display, response, and transmission issues.
To Next Page
General
