Joy-it Arcade-GameStation - Page 45

Ausgabe 18.01.2017 Copyright by Joy-IT 45
3
Arcade-GameStaon
7. Service
Linker Kit Baseboard
The Linker Kit Baseboard allows it to easily connect and control up to 12 Lin-
kerKit-Modules.
A lot of sensor-combinations are possible with this board.
 Compatible with all Linker Kit systems
 Compatible with Raspberry Pi A, B, B+
 Extends the Rasperry Pi by a 8-Channel analog-digital converter to process analog signals.
Linker Kit Board with 2 buttons
Extensionboard which contains two buttons.
Linker Kit Board with flamesensor
Depending on the lights intensity, it produces a variable voltage which is easy
to analyse by a microprocessor.
 IR- / UV-Sensor, matched to the color-range of flames
 Analog-Output, 0-3V
 Operates on 5V
 For Raspberry Pi A, B, B+, Arduino, pcDuino etc.
Linker Kit Board with sound-sensor
The board contains a microphone which can, due to the good response
behaviour, be either used as a microphone or as a soundsensor.
 Elektret Microphone, LM386 und level setter
 Analog signal output and power supply through the über LinkerKit-wiring
Linker Kit Board with Hallsensor / Magnetsensor
This board contains a hall-sensor which detects magnetic fields.
 Breakout-Board with hallsensor Allegro A1101
 LED for operation-control