Joy-it COM-ZY12PDN User Manual

USB-PD TRIGGER MODULE
COM-ZY12PDN, COM-ZY12PDN-ST and COM-ZY12PDN-USB
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
All three items have the same circuit board and dier only in the output
interface.
When using the modules, make sure to use a suicient cable
cross-section.
To use the modules as intended, you need a USB-PD-capable power
supply unit.

Joy-it COM-ZY12PDN Specifications

General

Number of devices supported	1
Current	5 A
Input voltage	5 - 20 V
Power consumption (max)	100 W

Weight and Dimensions

Depth	15 mm
Width	31 mm
Height	4 mm

Summary

General Information

Output Interfaces

COM-ZY12PDN Output Interface

Details the output interface for the COM-ZY12PDN USB-PD trigger module.

COM-ZY12PDN-ST Output Interface

Details the output interface for the COM-ZY12PDN-ST USB-PD trigger module.

COM-ZY12PDN-USB Output Interface

Details the output interface for the COM-ZY12PDN-USB USB-PD trigger module.

Operation and Mode Selection

Voltage Mode Selection

Explains how to change voltage modes using the LED and button.

Setting Default Modes

Procedure to set a voltage mode as the default startup mode.

Other Information

Electrical and Electronic Equipment Disposal

Information on disposal obligations according to ElektroG and symbol meaning.

Return Options and Packaging

Details on returning old appliances and packaging for transport.

Support Contact