Joy-it JT-RD6006 User Manual

www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
LABORATORY POWER SUPPLY
JT-RD6006 / JT-RD6012
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
The RD6006 and the RD6012 are constant voltage and constant current
DC power supplys which can convert voltages down.
They are very easy to handle and the adjustment can either be made by
keypad or by the encoder or even both.
It is easy and quick to store and recall data and the devices are connecta-
ble with a PC or via WIFI with a handheld device in addition to that you
can use an App for control. On the 2.4 " colour screen you can read out
many values and additional information.

Joy-it JT-RD6006 Specifications

General

Output Voltage	0-60V
Output Current	0-6A
Output Power	360W
Voltage Resolution	0.01V
Current Resolution	0.001A
Capacity Measurement	Yes
Energy Measurement	Yes
Display	2.4 inch LCD
Output Ripple Typical	< 50mV
Operating Temperature	0°C to 40°C
Frequency	50Hz/60Hz
Protection	Over Voltage, Over Current, Over Temperature
Storage Temperature	-20°C - 70°C

Summary

General Information

Safety Instructions

Technical Specifications

Screen Overview

Device Overview

RD6006 / RD6012 Front Panel

Details the front panel components and layout of the RD6006 and RD6012 models.

RD6006 Back Panel

Illustrates and labels the components on the back of the RD6006 power supply.

RD6012 Back Panel

Illustrates and labels the components on the back of the RD6012 power supply.

Menu Introduction

Operation Menu

Explains menu navigation, confirming selections, and restoring settings via button combinations.

Battery Charging Mode

Details the battery charging function, setting voltage/current, and safety precautions.

Output Voltage and Current Setting

Describes how to set output voltage, current, and protection values using buttons and encoders.

Data Group Quick Storage and Callout

Explains how to save and recall output settings using memory (MEM) and keypad buttons.

Keypad Lock and Unlock

Details the keypad lock function, its automatic activation during communication, and manual unlock.

System Setting

Covers system settings like call/power-on behavior, beeper, logo, language, and screen brightness.

Main Page Style Setting

Allows selection between classic style and curve style for displaying output data on the main page.

Storage Data Setting

Explains how to set and store output voltage, current, and protection values into data groups.

System Information

Provides access to system information such as SN number, firmware version, and system temperature.

Additional Information

Support