Ensure all screws and knobs are securely fastened
to prevent unwanted shifting.
Not for use while operating vehicle.
For safety reasons place mount a safe distance
from airbags.
Extend & Rotate Arms: Release latch by pulling it
away from the mount arm. Once released pull middle
joint upward until it has reached desired position. Secure
position by turning latch to locking position. To rotate
the arms & tray turn knobs at adjust to your liking.
Tighten knobs to secure.
Open
Close
Attach Brackets to Tray: Step 1: Attach rubber pads to
bracket tip. Step 2: Attach brackets to tray.
Secure Device to Tray: Extend brackets fully and place
device onto tray. Secure brackets tightly to edge of
device ensuring a tight connection.
Extending & RotateAttach Brackets to Tray
Secure Keyboard on Tray. Step 1: Place tray in a flat
position. Fully expand brackets. Step 2: Place keyboard
on top of tray. Secure brackets tightly to edge of
keyboard ensuring a tight connection.
Use Tray for Keyboard Case
Caution
Support
For questions or concerns please contact us at:
Customer Service Support
Toll Free: +1.877.JOY.FACT (877.569.3228)
support@thejoyfactory.com
Use Tray with Device
INSTALLATION GUIDE: Adjustable Tray
4
1
2
1
2
To Previous Page
Loading...
Need help?
General