×2
Connect Power Cord
Connect one end of the power cord to the power socket at the bottom
of the main body, and then the power plug to the AC power socket.
Start joyami Smart Rice Cooker S1 after the power cord is connected.
Start to Use
Connect to Wi-Fi
The Wi-Fi icon blinks when joyami Smart Rice Cooker S1 is powered on
for the first time. Search a device with Mijia APP and then you may link it
to the APP. After connection, the Wi-Fi icon is on constantly and goes
off when the screen turns off.
Simultaneously press down the “TIMER” button and “SELECT/CANCEL”
button and then reset Wi-Fi. The screen displays a marquee tool for
resetting Wi-Fi settings. After a successful reset, the Wi-Fi icon blinks on
the screen and joyami Smart Rice Cooker S1 becomes ready for
connection.
Reset Wi-Fi
Start to Cook Rice
1. Open the lid
Press down the Lid opening button.
Note: To take out the inner pot, gently push the lid to open it fully. Avoid
touching the inner lid when taking out the inner pot.
2. Put in rice and water
Put in 2 cups of Jasmine Rice and add water to the water level “2”, for
example. When adding water, do not exceed the corresponding water
level; otherwise, overflow, short circuit or other fault may be caused.
2 cups of rice are for 2
persons approximately
Connect with Mijia App
Scan the QR code to download and install the app. You will be directed
to the connection setup page if the app is installed already. Or search
"Mijia" in the app Store to download and install it.
Open Mijia app, tap "+" on the upper right, and then follow prompts to
add your device.
Note： The version of Mijia app might have been updated, please follow
the instructions based on the current app version.
This product works with Mijia app. Control your device, and interact it
and other smart home devices with Mijia app.
03
To Next Page
Loading...