Need help?Do you have a question about the Joyetech e-Vic VTC Mini and is the answer not in the manual?
General| Wattage Range | 1W - 75W |
|---|---|
| Resistance Range (TC Mode) | 0.05Ω - 1.5Ω |
| Resistance Range (VW/Bypass Mode) | 0.1Ω - 3.5Ω |
| Thread | 510 |
| Firmware Upgradeable | Yes |
| Charging | Micro USB |
| Battery | 1 x 18650 (not included) |
| Temperature Control Range | 200°F - 600°F / 100°C - 315°C |
| Display | 0.96 inch OLED |
| Output Mode | Variable Wattage / Temperature Control / Bypass |
| Material | Zinc alloy |
| Output Voltage | 0.5V - 9V |
| Dimensions | 22.20*38.20*82.00mm |
| Temperature Control | Yes (VT-Ti/VT-Ni) |
Instructions for battery insertion, device power control, and basic vaping operation.
Guides on using Stealth mode for screenless vaping and locking settings to prevent accidental changes.
Explains how to navigate menus and switch between VT-Ni, VT-Ti, VW, and Bypass output modes.
Details adjusting coil temperature, locking resistance, and installing new coils for accurate VT temperature control.
Covers wattage adjustment in VW mode and the direct voltage output functionality of Bypass mode.
Details device protections like Over 10s, Atomizer Short-circuit, Temperature protections, and error alerts.
Explains alerts for low battery voltage and low atomizer resistance, and their operational impact.
Step-by-step guide on how to unscrew and replace the atomizer head.
Instructions for charging the battery, alongside important usage precautions and warnings.
Outlines the warranty coverage, period, and conditions under which it may be voided.
To Next Page
