Joyetech eGo AIO - Device Functions and Safety Features; Protection Systems; Resistance Monitoring; Battery Status Indicator

English
6
English
7
air inow. The air inow will be the largest when both signs match with each other,
otherwise it decreases when turning left or right.
Functions:
Short circuit protection:
1, When the short circuit occurs before working, the button light ashes for 5 times and then powers off.
2, When the short circuit occurs while working, the button light ashes for 3 times before short circuit (reset).
Atomizer protection:
eGo AIO has a 15 second run time protection. The light will ash 10 times if the button is pressed for
more than 15 second.
Low voltage protection:
When the battery voltage drops lower than 3.3V, the button light ashes for 40 times and the device
will power-off. Charge the device to power device back on.
Resistance test:
1, When the resistance at the output end is >5ohm, the light ashes slowly if you press the button.
2, When the resistance at the output end is <0.3ohm, the light ashes quickly for 5 times, suggesting
the ohm is too low or potential short circuit.
Battery display function:
The light will ash slowly or stay lit when battery quantity is high, on the contrary, the light ashes in
frequency.