Joyor S5 - ODO Reset and Error Code Definitions

16 17
ENEN
ODO: To clear ODO
IntheODOparametersettinginterface,brieypressthe
buttonandthenpressandholdfor5-6secondsuntilthe
numberiszero.
NO.
Error
Code
Definition
1 ERRO 1 Motorfailure
2 ERRO 2 Acceleratorthrottlefailure
3 ERRO 3 Controllerfailure
4 ERRO 4 Brakefailure
5 ERRO 5 Undervoltageprotection
6 ERRO 6
Communicationfailure,thedisplaycannot
receivetheoutputfromthecontroller
7 ERRO 7
Communicationfailure,thecontroller
cannotreceivetheoutputfromthedisplay
Error Codes
Thenumbercorrespondingtothemulti-functionarea
representsthecorrespondingfaultcontent.Thespecic
statusisasfollows: