JOYTECH SL600AC - User Manual

Sliding Gate Operator
User's Manual
SL600AC
SL600AC SLIDING GATE OPERATOR
1
1. Products introduction
Please read the instructions carefully before proceeding.
MCU is supplied to control the gate operator.
Keypad / single button interface.
Have Infrared safety sensor interface.
Soft start and soft stop function and the soft stop width are
adjustable, and the soft start function can be disabled.
Working time is adjustable.
Motor output torque is adjustable.
Manual key release designed for emergency purposes.
2. Important safety information
Carefully read and follow all safety precautions and warning before
attempting to install and use this automatic gate operator.
z The gate operator should be installed by a qualified technician;
otherwise, serious personal injury or property damage may
occur.
z When opening or closing the gate, do not attempt to walk or
drive through the gate.
z If enable the auto-close function, must use the infrared sensor.
z Children should not be allowed to play near or operate automatic
gates.
z The automatic gate operator must be grounded.
z Install the gate operator on the inside of the property; DO NOT
install it on the outside of the property where the public has

Summary

Product Overview and Safety Features

Product Features and Interface

Details MCU control, keypad/single button interface, infrared sensor, and adjustable functions.

General Safety Precautions

Covers technician installation, safe operation, children's safety, grounding, and location.

Specific Safety Instructions

Includes warnings about moving parts, power failure operation, and servicing the operator.

Setup and Configuration Safety

Emphasizes transmitter code management and verifying power supply compatibility.

Mechanical Installation Guide

Gate Operator Configuration Overview

Diagram illustrates the gate operator's configuration with drive gear, rack, and gate.

Installation Preparations

Covers gate preparation, conduit usage, concrete pad requirements, and anchor installation.

Operator Base Mounting

Instructions for mounting the gate operator base to the concrete pad and leveling.

Rack and Gear Installation

Detailed steps for installing the rack element, ensuring correct meshing with the gear.

Adjustment and Limit Switch Setup

Spring Limit Switch Installation

Install spring limit switches horizontally at gate ends to prevent over-travel.

Manual Positioning for Limits

Manually position the gate using the release key to set limit switch activation points.

Magnetic Limit Switch Installation

Install magnetic limit blocks at gate ends to control opening and closing positions.

Wiring and Connection Procedures

Manual Operation and Release

Procedure for manual gate operation using the release key during power failure.

Power Input and Caution Light

Wiring notes for power input (J3) and caution light connection (J4).

Control Board Connections

Details on output power supply, infrared connection, and switch/keypad interfaces.

Switch and Detector Interfaces

Wiring for pedestrian switch, loop detector, and motor/capacitor connections.

Tuning, Operation, and Troubleshooting

Adjustable Settings (VR Dials)

Adjustments for motor working time, brake force, slow stop width, and motor output force.

Remote Control Operation

Instructions for using the remote transmitter, programming, and erasing controls.

Programming Process (DIP Switches)

Configuration of DIP switches for soft start, limit switch type, and auto-close timing.

Troubleshooting Common Issues

Identifies common problems with door operation, LED display, and remote transmitter.

Maintenance and Packing List

LED Indicator Functions

Explanation of what each LED indicator on the control board signifies.

Regular Maintenance Checks

Recommendations for monthly checks, photocell usage, and servicing safety.

Standard Packing Contents

List of items included in the standard package upon receiving the gate operator.

JOYTECH SL600AC Specifications

General

Brand	JOYTECH
Model	SL600AC
Category	Garage Door Opener
Language	English