J+J J4C S300 Handbook

79
Index
HANDBOOK / KIT DPS
ASSEMBLY INSTRUCTIONS - DPS KIT 140/300
KIT COMPONENTS
Element A - 1 Cover
Element B - 1 Plastic column
Element C - 1 DPS positioner PCB
Element D - 2 Sheet metal Fixing screws
Element E - 1 Plastic Fixing screws
Element F - 1 Schematic diagram label
* Fill in the document inside the kit, and send it to the fax number (93 871 32 72) or e-mail: info@jjbcn.com, shown in
the document.
* Remember to stick the (F) label on the actuator.
Very important!
Please follow the instructions step by step. Before connecting “A” plug to the actuator, check that
the voltage is the same as the one specied on the label (carter). To convert a standard (on-off)
J4C electric actuator into a modulating function with positioner, proceed as follows:
A B
C
D
E
F

J+J J4C S300 Specifications

General

Brand	J+J
Model	J4C S300
Category	Controller
Language	English