26
Index
ACTUATOR WITH BSR
ACTUATOR WITH DPS
Without power supply
In open position
In close position
Opening
Closing
Torque limiter function on, moving from close to open
Torque limiter function on, moving from open to close
Actuator in MANUAL mode (Exceeded time)
The actuator has stopped (*)
In middle position (for a 3 position actuator only)
Actuator without power, working with the BSR NO system.
Max.3 min., (led off).
Actuator without power, working with the BSR NC system.
Max.3 min., (led off).
Battery protection. Danger, the battery needs recharging
BSR blocked.
(*) Actuator powered on to Open and Close position at the same time.
Without power supply
Motor Stop
Opening
Closing
Self adjusting conguration
Torque limiter function on, moving from close to open.
Torque limiter function on, moving from open to close.
Instrum. Signal overpassed. Blocked. Need a re-set.
Actuator in MANUAL mode (Exceeded time).
No Instrum. Signal pick-up. 4-20mA and 1-10V only.
ACTUATOR OPERATIONAL STATUS
ACTUATOR OPERATIONAL STATUS
HANDBOOK / J4C SERIES