EasyManua.ls Logo

JRC 1500 MKII - Turning the Radar on and off

JRC 1500 MKII
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
4.2 TURNING THE RADAR ON AND OFF
TO TURN ON Press the STBY/OFF key.
TO TRANSMIT Press the X-MIT key.
TO STAND-BY Press the STBY/OFF key.
TO TURN OFF Press the STBY/OFF key and the X-MIT/OFF key si-
multaneously.
When you
Press the STBY/OFF key, a 90 second warm-up count down timer is activated
and displayed together with the total (display unit) usage to date.
Press the X-MIT/OFF key, the radar transmits, the scanner begins to rotate and
echoes will appear on the screen.
Press the STBY/OFF key, the radar returns to stand-by mode to reduce battery
drain. The rotator stops.
Press the X-MIT/OFF key again, the radar reverts to full transmitting function.
These sequences are also guided by on-screen prompts.
OPERATION
FIG. 4-2 TURNING THE RADAR ON/OFF
90 SEC
0000HOURS
VX.X
PUSH XMIT TO OPERATE

Related product manuals