JAN-2000 ECDIS – fully type approved and ec
JAN-2000
– performance features
The new JAN-2000 is a high-performance and fully type
approved ECDIS system with excellent on-screen menus,
which will greatly shorten most users’ learning period.
The new JAN-2000 ECDIS system is fully type approved,
and because of its controlled interface it is also highly
cost-e ective. It only has gyro, log, GPS 1 & 2 and AIS as
standard. TCS and radar overlay is not possible.
This makes the JAN-2000 an economical and well- tted
ECDIS solution yet still integrates the high performance
standard you would expect from JRC.
Cost-effective solution
Unique features
Also, it is easy to active, deactivate
and switch between AIS target
symbols. This simply can be done
with an integrated AIS lter,
prioritising the targets within a
dedicated area.
Multiple and wide screen viewing is possible with the new
JAN-2000. You can divide the chart screen into two sections,
in which the same or di erent charts can be displayed, in a
mixture of ways. In this eld of view, it provides a ‘look-ahead’
capability, especially useful in coastal areas. With the wide
screen view function, an additional screen in the display area,
showing a segment of the chart, allows viewing at a glance.
Multi-view
The AIS is an important key device used to indicate AIS target symbol and information
on the ECDIS. These targets are very useful, as it provides the maneuvering conditions
of other ships at a glance, allowing for safe and e ective navigation. The name of
AIS targets
the vessels, and bearing, range, speed,
length, heading and much more AIS target
speci cs from other ships are received and
displayed. The AIS symbols are continuously
displayed on-screen without the in uence
of the radar characteristics. The AIS targets
are never shielded by ground, rain or cloud
re ections, nor are they eliminated by
adjustments of anti-sea or anti-rain clutter.
120nm
1
24
3
1. vessels’ position
2. ring area
3. sector area
4. heading area
Standard
Gyro
Log
GPS 1+2
AIS
To Next Page
Loading...