To Next PageTo Next PageWhat to do if the LCD on my JRC JCX-161 Security System operation panel is not displayed?
If the LCD on the operation panel isn't displaying, there are a couple of things to check: * First, make sure the power breaker is turned on. * Second, the display might be dimmed. Try adjusting the dimmer to see if that brightens it up.
Why is the visual indication not working on my JRC JCX-161 Security System's NCJ-895/896?
If the visual indication on your NCJ-895/896 isn't working, the display might be dimmed. Try adjusting the dimmer to see if that resolves the issue.
Why is the visual indication not working on my JRC JCX-161's NCD-2257?
If the visual indication on your NCD-2257 isn't working, it might be because the display is dimmed. In this case, try adjusting the dimmer.
What to do if the NYG-5 reset does not work on JRC JCX-161 Security System?
If the NYG-5 reset isn't working, it might be due to air conditioning devices nearby. Try taking apart the air conditioning devices from NYG-5.
General| Brand | JRC |
|---|---|
| Model | JCX-161 |
| Category | Security System |
| Language | English |
