-ii -
Operation of Officer of the Watch (OOW)
- Before a dormant period is finished, push the button for reset of key or the reset button unit, and reset a
dormant period.
- Any other key press will also cause reset.
Since alarm is generated when the icon is displayed on the LCD lower part, press a key, display a menu
screen, choose [ALARM], and check the state of alarm.
Alarm information
AC FAIL The state of AC power supply is displayed.
DC FAIL The state of a DC power supply is displayed.
SYSTEM FAIL The state of a BNWAS system is displayed.
When required, various call functions are used.
EM'CY CALL
An emergency call is initiated by pressing a key for 2 seconds.
All the audible alarm unit start sounding.
OFFICER CALL
An officer call is initiated, when a key is pressed, a menu screen is displayed and
[OFFICER CALL] is chosen.
The audible alarm units of the room set to the bridge and the backup officer sound.
Reset operation
To Next Page
Loading...
