JRC JLN-550 - Standard and Optional Components

1. Introduction 3
1.3 Components
The standard equipment and options are shown in the tables below.
Standard Equipment
Description
Model No.
QTY
MASS
Remarks
MAIN DISPLAY
NWW-60DA
-60DB
-60TA
-60TB
1
2kg
DA: 2 axis/Wall mount type
DB: 2 axis/Flush mount type
TA: 3 axis/Wall mount type
TB: 3 axis/Flush mount type
Select one.
SIGNAL DISTRIBUTOR
NQA-3012
1
10kg
SIGNAL PROCESSOR
NJC-24
1
15kg
TRANSDUCER
NKF-770
1
120kg
Flush mount type
With cable 40m
SPAIR PARTS
7ZXBS0018
1
INSTRUCTION MANUAL
7ZPBS2802F
Options
Description
Model No.
QTY
MASS
Remarks
WING DISPLAY
NWW-61D
-61T
2
5kg
D: 2 axis type
T: 3 axis type Select one.
REMOTE DISPLAY
NWW-62DA/DB
NWW-62TA/TB
1
1.3kg
D: 2 axis, T: 3 axis type
A: Wall, B: Flush mount type
GYRO SENSOR
NJZ-1080
1
3kg
OPERATOR UNIT
NWZ-120GA
-120GB
1
3.5kg
GA: Wall mount type
GB: Flush mount type
Select one
RECTIFIER
NBA-3263
1
8Kg
For NWZ-120G
REMOTE DISPLAY
NWW-24xxxxx
2max
6.5kg
Analog flush mount type
REMOTE DISPLAY
NWW-25xxxxx
7kg
Analog wall mount type
REMOTE DISPLAY
NWW-26xxxxx
2.5kg
Analog small flush mount
type
REMOTE DISPLAY
NWW-49A
-49B
1
2.5kg
A: Wall mount type
B: Flush mount type
DIMMER UNIT
NCM-227
1
For NWW-60/62
(For digital display)
DIMMER UNIT
NCM-329H
1
For NWW-24/26
(For analog display)
DIMMER UNIT
NCM-506
1
For NWW-49
(For digital display)
DISTANCE COUNTER
NWW-7
1
Flush mount type
TRANSDUCER
NKF-772
1
Gate Valve type
With cable 40m