JRC JMR-5482-S - Page 15

2-9 Section 2 Basic Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
Using the automatic rain/snow clutter suppression mode
The rain/snow clutter suppression in accordance with the intensity of rain/snow clutter is possible. Use
this mode when the rain/snow clutter's intensity differs according to directional orientation.
1 Click on the Automatic Rain/Snow Clutter Suppression button.
[AUTO] (automatic) is displayed on the automatic rain/snow clutter suppression
button.
Each time this button is clicked on, the display switches between [AUTO] (automatic) and
[MAN] (manual).
2 Click the left mouse button of the button on the [Rain] (rain/snow clutter adjustment)
slider, drag it with the trackball, and adjust the volume of the echo created by
rain/snow clutter that is displayed on the screen.
Even while auto rain/snow clutter is being suppressed, the amount of images can be
fine-adjusted manually.
Canceling automatic rain/snow clutter suppression
1 Click on the Automatic Rain/Snow Clutter Suppression button.
[MAN] (manual) is displayed on the automatic rain/snow clutter suppression button.
Each time this button is clicked on, the display switches between [AUTO] (automatic) and
[MAN] (manual).
Auto Rain/Snow Clutter Suppression button