To Next PageTo Next Page
Need help?Do you have a question about the JRC JMR-7230-S3 and is the answer not in the manual?
General| Brand | JRC |
|---|---|
| Model | JMR-7230-S3 |
| Category | Marine Radar |
| Language | English |
Provides a step-by-step flowchart for the basic operation of the radar system.
Details the procedures for powering the radar system on and off safely.
Explains how to adjust the radar display for optimal viewing conditions.
Covers various operational aspects and settings for the radar.
Outlines limitations and constraints associated with target tracking and AIS functions.
Explains the principles and issues related to collision avoidance using radar.
Defines and illustrates symbols used for target tracking and AIS.
Covers preparatory settings for target tracking and AIS operations.
Details how to set up and operate the target tracking system.
Explains the setup and operation of the Automatic Identification System (AIS).
Describes the alert messages generated by the target tracking and AIS systems.
Covers the functions related to displaying and managing target tracks.
Details how to input own ship's voyage data into the AIS system.
Explains how to edit and send AIS messages.
Describes the AIS message tray for viewing received, sent, and saved messages.
Explains how to search and highlight TT/AIS symbols based on criteria.
Covers the trial maneuvering function for collision avoidance simulation.
Details how to display the target list for TT and AIS functions.
Explains how to view own ship's AIS information.
Describes how to display information for the last lost AIS target.
Discusses the radar wave and its interaction with the horizon.
Explains how target intensity affects radar display.
Details the causes and handling of sea and precipitation clutter on radar.
Identifies and explains various types of false echoes on radar display.
Describes the display of SART signals on the radar screen.
Explains how AIS-SART information is displayed.
Provides an overview flowchart for ECDIS functions.
Details the procedures for starting and preparing the ECDIS system.
Explains how to navigate and move the chart display.
Covers the functionality for adjusting the chart zoom level.
Explains how to change object display categories in ECDIS.
Details how to select motion and bearing modes in ECDIS.
Covers managing and displaying a list of ports in ECDIS.
Explains the process of selecting an S-57 chart.
Details how to select an ARCS chart.
Covers multi-view and wide-range chart display options.
Explains how to verify object information using the pick report function.
Details how to mark own ship's position with an event mark.
Covers displaying radar images overlaid on charts.
Explains how to set the true bearing for the system.
Details how to set own ship's speed parameters.
Provides an overview of the route planning capabilities.
Explains how to configure the display settings for routes.
Details the procedures for opening and closing the route planning dialog.
Describes the components and functions within the route planning dialog box.
Explains how to save a planned route.
Covers route planning methods using table editing.
Details route planning methods using graphic editing.
Explains how to create an alternative route.
Covers methods for checking the validity and safety of route data.
Details navigation calculation functions like ETA and ROT.
Explains how to import and export route files.
Lists and explains error messages encountered during route creation.
Details the process of monitoring a planned route.
Explains how to manage route files, including selection and deletion.
Describes the dialog box for viewing voyage monitoring information.
Details the voyage calculation dialog box.
Explains how to compare planned and actual route data.
Covers how to verify detailed information of waypoints (WPT).
Details how to set up the area for monitoring dragging anchor.
Explains the procedures to start and stop dragging anchor monitoring.
Covers modifying and managing the anchor monitoring area on the chart.
Provides a flowchart for initiating automatic sailing.
Explains how to select a route for automatic sailing.
Details selecting the waypoint where automatic sailing begins.
Covers the procedure for starting the automatic sailing function.
Explains how to stop the automatic sailing function.
Describes the alerts generated during automatic sailing.
Details the process for manually updating charts.
Explains how to display and search S-57 charts.
Covers displaying charts by entering a specific position.
Explains how to confirm and accept updated S-57 charts.
Details how to display date-dependent objects on charts.
Covers displaying chart boundaries.
Explains how to confirm temporary ARCS chart information.
Details how to adjust the position of an ARCS chart.
Covers displaying the list of chart abbreviations.
Explains how to maintain charts.
Details the process of creating and editing user-defined maps.
Explains the tools used for creating and editing user maps.
Covers manual chart updating procedures within the ECDIS screen.
Details using map creation tools specifically for manual chart updates.
Explains how to create various objects within maps.
Covers deleting multiple objects based on type or color.
Details managing and editing objects like marks and lines.
Explains how to display a manual update list in ECDIS.
Covers how to view and search entries in the logbook.
Details the procedures for editing logbook entries.
Explains how to output logbook event data.
Covers setting chart display modes, including multi-view in ECDIS.
Details various options for customizing the screen display.
Explains how to set up the engine graph display.
Covers setting the graph range for the ROT slide bar.
Details how to select items for setting up alerts.
Explains conditions for generating collision avoidance alerts.
Covers conditions for generating new target alarms.
Details conditions for depth and safety contour alerts.
Explains how to set up danger detection vectors and sectors.
Covers conditions for generating area warnings.
Details conditions for track control alerts.
Explains conditions for position integrity alerts.
Covers procedures for setting up alert processing.
Details how to set up the alert timer.
Explains basic operations of the settings dialog box.
Covers fundamental settings for radar signal processing.
Details how to configure radar signal processing settings.
Explains how to preset observation scenes.
Details settings for displaying other ships' radar trails.
Covers the configuration of radar antennas.
Explains how to set associations between targets.
Details how to set own ship's dynamic characteristics.
Covers how to set up and perform operation tests.
Explains how to configure AIS filters.
Details how to enable or disable the target track function.
Covers setting parameters during route plan creation.
Explains how to set parameters for automatic sailing.
Details setting temporary route parameters.
Covers chart operation settings.
Explains how to configure logbook settings.
Covers settings for navigation equipment.
Details how to adjust colors and brightness of the display.
Explains how to configure sound settings.
Covers settings for key assignments.
Details how to configure user preferences.
Explains how to use the screen capture function.
