JRC JMR-7230-S3 - Section 18 Setting up the Operation Mode; 18.1 Basic Operation of the Settings Dialog Box; 18.2 Basic Settings for Radar Signal Processing; 18.3 Setting Radar Signal Processing

Section 5 Basic Operation of the Radar 5-2
Power ON this system and start the radar.
Adjust reception gain, sea clutter and rain/snow
clutter so that the observation range as well as the
target display become the clearest.
Acquire data, and then measure the range and
bearing of the target.
Exit the operation of the Radar.
Refer to "5.2.1 Powering on and
starting".
Refer to "5.3 Observation Environment
and Image Adjustment".
Refer to "5.4 General Radar Operation".
Refer to "5.2.2 Exiting radar operation".