JRC JMR-7230-S3 - Clearing Other Ships Track; Saving and Loading Other Ships Track Data; Setting up the Display Interval of Other Ships Track

Section 6 Target Tracking and AIS 6-60
6.8.2.5 Setting up the display interval of other ship’s track
A display interval of other ship’s track can be set.
For the details, refer to "16.2.8 Setting up the Display of Other Ship's Track".
Note
This function is not available when the Target Track Function is turned off.
6.8.2.6 Clearing other ship's track
The other ship's track can be cleared by setting a color or a track number.
For the details, refer to "16.2.8 Setting up the Display of Other Ship's Track".
6.8.2.7 Saving and loading other ship's track data
Other ship's track data can be saved on HDD and load from the HDD.
(Data can be saved to HDD until the data volume becomes full.)
For the details, refer to "3.19.2 File management".