JRC JMR-7230-S3 - Alert Display

6-53 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Note
• When a dangerous target ship is lost, a lost alarm is issued and the symbol changes to a lost
symbol. The system calculates the current position from the last-received data and continues
displaying the symbol for eternity.
•
When the [AIS] button in the target ship information window is turned off, the symbol is
canceled.
6.7 Alert Display
Target tracking and AIS system have the following alerts.
Message
Description
AIS ACT 95% Capacity
The number of activated AIS targets reached 95% of tolerance.
AIS 95% Capacity
The number of AIS targets reached 95% of tolerance.
CPA/TCPA(AIS)
CPA/TCPA warning (AIS)
Lost(AIS)
The AIS target was lost.
AIS MAX Target The number of AIS targets reached the maximum number of
targets displayed.
New Target(AIS)
The AIS target was acquired and activated.
Not Allowed(TT Out of Range)
Out of TT acquisition range
Trial Under the trial process. Occurs instead of a danger target alarm
when the predicted route of the tracking target intersects with the
CPA/TCPA limit range
TT(95% Capacity)
The number of TT targets reached 95% of tolerance.
TT(CPA/TCPA)
CPA/TCPA warning (TT)
TT(Lost)
Acquired TT was lost.
TT(MAX Target) The number of TT targets reached the maximum number of
targets.
TT(New Target)
TT was acquired.
TT(Out of Range )
TT went out of 32NM.
TT(Reference Lost)
The TT reference target was lost.