EasyManua.ls Logo

JSJ Greentouch 2803-FG - Electrical Safety and Grounding; Grounding and Outlet Requirements

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
17. This appliance has hot and arching or sparking parts inside. Do not use it in areas
where gasoline, paint or ammable vapors or liquids are used or stored. This replace
should not be used as a drying rack for clothing. Christmas stockings or decorations
should not be hung in the area of it.
18. Use this appliance only as described in the manual. Any other use not recommend-
ed by the manufacturer may cause re, electric shock or injury to persons.
19. Always plug heaters directly into a wall outlet / receptacle. Never use with an
extension cord or re-loadable power tap (outlet / power strip).
20. This heater has a VISUAL alarm to warn that parts of the heater are getting
excessively hot. If the alarm ashes, immediately turn the heater off, unplug the unit
and inspect for any objects on or adjacent to the heater that may have blocked the
airow or otherwise cause high temperatures. DO NOT OPERATE THE HEATER WITH THE
ALARM FLASHING.
21. This heater is for use on 120 volts. The cord has a plug as shown in Figure A. An
adapter as shown in gure B is available for connecting three-blade grounding type
plugs to two-slot receptacles. The green grounding plug extending from the adapter
must be connected to a permanent ground such as a properly grounded outlet box
as shown in gure C. The adapter should not be used if a three-slot grounded
receptacle is available.
IMPORTANT INFORMATION
FIGURE BFIGURE A
FIGURE C
GROUNDING PIN
ADAPTER
GROUNDING MEANS
METAL SCREW
COVER OF
GROUNDED
OUTLET BOX

Related product manuals