Why is my JSJ Indoor Fireplace remote control not working?
If your JSJ Indoor Fireplace remote control isn't working, the most common cause is weak or failing batteries. Try replacing the battery with a new one.
How to fix no power on my JSJ Greentouch 2803-FG Indoor Fireplace?
If your JSJ Indoor Fireplace has no power, first ensure the power cord is securely plugged into a standard 120V outlet. Then, make sure the unit is powered on.
Why is the power cord of my JSJ Greentouch 2803-FG Indoor Fireplace getting warm?
It's normal for the power cord of your JSJ Indoor Fireplace to get warm during use, as the heater requires more current to operate. However, check the connections of the appliance cord and the outlet to ensure the plug fits tightly. Frequently inspect the plug and outlet during use. If it becomes HOT, stop using the appliance and consult a qualified electrician to check or replace the overheating outlet.
What to do if the flame effect is not working on my JSJ Greentouch 2803-FG Indoor Fireplace, but the logs are glowing?
If the flame effect is not working on your JSJ Indoor Fireplace but the logs are glowing, the flame effect might be powered off. Push the flame brightness button several times to scroll through the flame brightness settings.
Why aren't the heater and blower working on my JSJ Greentouch 2803-FG?
If the heater and blower on your JSJ Indoor Fireplace aren't working, but the other functions are, the heater override switch may be engaged, disabling the heater. Check the side of the unit for the heater override toggle switch and change its position to the 'on' position.
Why is the remote control signal weak for my JSJ Greentouch 2803-FG Indoor Fireplace?
A weak remote control signal on your JSJ Indoor Fireplace can occur due to: 1. Pressing the buttons too quickly. Try pressing the buttons more slowly and steadily. 2. Using the remote too far away or at an off-angle. The remote will only work within 20 feet and 45 degrees to either side from the front of the fireplace insert.
What does error code E3 mean on my JSJ Indoor Fireplace?
If your JSJ Indoor Fireplace displays the error code “E3”, it indicates that the manual reset overheat protection has triggered. Power off and unplug the fireplace insert. Inspect the back and top to ensure the air intakes are not blocked, as this can cause overheating. Wait 30 minutes, then replug the unit and power it on while monitoring for overheating. If the problem persists, stop using the heater and contact customer service.
What does error code E1 mean on my JSJ Indoor Fireplace?
If your JSJ Indoor Fireplace displays the error code “E1”, it means the thermostat sensor is disconnected. Contact customer service for assistance.
What does error code E2 mean on my JSJ Greentouch 2803-FG Indoor Fireplace?
If your JSJ Indoor Fireplace displays the error code “E2”, it indicates that the thermostat sensor is broken. Contact customer service.
Details voltage, amperage, and wattage for the appliance.
Essential safety guidelines for operating the electric fireplace to prevent fire, shock, or injury.
Information on proper electrical grounding and outlet usage for safe operation.
Explanation of the heater override switch and its purpose in preventing unintended activation.
Details the different control panels and remote functions for various models.
Explains individual button functions and how to replace the remote control battery.
Guides users through common problems, their causes, and recommended actions.
Instructions for cleaning the fireplace insert and vents to maintain its appearance.
Details FCC and IC compliance for radio frequency emissions.
Provides customer service contact details and required information for support.
Outlines the terms, conditions, and limitations of the product's one-year warranty.
General| Category | Indoor Fireplace |
|---|---|
| Fuel Type | Electric |
| Voltage | 120V |
| Heating Coverage | 400 sq ft |
| Remote Control | Yes |
| Color | Black |
| Timer | Yes |
| Safety Features | Overheat protection |
| Material | Metal |
| Model | JSJ Greentouch 2803-FG |
To Next Page
