16
(4) Setting group channel
1. Frequency displayed:
1-1 group set up
Press “SET” button for three sec. till the “MHz” show up and then re-press “SET” but-
ton till the group digit show up. Now you can press “UP” or “DOWN” button one sec.
to increase or decrease group number
1-2 channel set up
After 1-1 press “SET” button again the frequency display starts showing up, press “UP”
or “DOWN” button one sec. to increase or decrease frequency digit.
3. After 1-1 & 1-2 step, press “SET” button again the mic. will store the frequency
automatically.
2. Group displayed:
2-1 Press “SET” button for three sec. till the group digit show up then re-press “UP” or
“DOWN” button one sec. to increase or decrease group digit.
2-2 After 2-1 press “SET” button again the frequency display starts showing up, press “UP”
or “DOWN” button one sec. to increase or decrease frequency digit.
2-3 After 2-2 & 2-3 step, press “SET” button again the mic. will store the frequency auto-
matically.
(5) Setting Frequency
1. Frequency displayed:
Press “SET” button for three sec. till the “MHz” show up and then you can press “UP” or
“DOWN” button one sec. to increase or decrease frequency.
Re-press “SET” button again the mic. will store the frequency automatically.
2. Group displayed:
2-1 Press “SET” button for three sec. till the group digit show up then re-press “SET” but-
ton the frequency starts ashing.
2-2 After 2-1 press “SET” button till the “MHz” show up and then re-press “UP” or
“DOWN” button one sec. to increase or decrease group digit.
2-3 After 2-1 & 2-2 step, press “SET” button again the mic. will store the frequency
automatically.
To Next Page
