Juice Charger Easy User Manual

START NOW!
QUICK START GUIDE
Start charging right away without need for prior charge activation at the JUICE
CHARGER easy. Simply plug in and recharge.
FREE CHARGE
Only permit selected persons to charge at your JUICE CHARGER easy. Always maintain full,
restricted control of your RFID activation. Functions with most standard RFID cards.
RFID
Audio Signal Guide
Description
Confirmation
Rejection
Master mode
Teach-in
Deletion
Start-up completed
Sound sequence
RFID card management
1. Hold RFID card up to device
2. Audio signal sounds
Teach-in the master card
The first card held up to the device
after installation automatically
becomes the master card.
i
1. Hold RFID master card up to device
2.
3. Hold user card to be taught-in up to
device
4.
Teach-in user card
Delete user card
1. Hold RFID master card up to device
2.
3. Hold RFID user card to be deleted up to
device
4.
1. Press the Delete button as
marked in Step 6 of the Installation
Guide
2.
Delete all cards
May only be performed by electrically
skilled persons
i
You can set the charging mode (Free Charge or RFID Activation) as
described in Step 7 of the Installation Guide.
How to use
Variant A
1. Plug in vehicle end
2. Hold RFID card up to device
3. Charging starts
Variant B
1. Hold RFID card up to device
(activated for 60s)
2. Plug in vehicle end
3. Charging starts
Download the JUICE CHARGER easy Update App now. This will enable you to
bring your device up to date in just a few steps.
juice-world.com/installieren/juice-charger-easy
Variant

Juice Charger Easy Specifications

General

Brand	Juice
Model	Charger Easy
Category	Battery Charger
Language	English

Summary

Free Charge Mode

RFID Operation and Management

RFID Card Management

Manage access by teaching-in or deleting RFID cards for the JUICE CHARGER easy.

Teach-in Master Card

The first card presented to the device automatically becomes the master card, confirmed by an audio signal.

Teach-in User Card

Use the master card, then present the user card to the device for the teaching-in process.

Delete User Card

Use the master card, then present the user card to be deleted to the device.

Audio Signal Guide

Reference for understanding audio signals indicating device status like confirmation, rejection, or teach-in.

How to Use - Variant A

Plug in the vehicle end, then hold the RFID card to the device to start charging.

How to Use - Variant B

Hold the RFID card to the device, then plug in the vehicle end to start charging.

Installation Steps Overview

Clampable Cross-sections

Specifications for fine-wire conductor and wire-end ferrule cross-sections for electrical connections.

Cable Connection Specifications

Details on connector cable types, minimum and maximum diameter for installation.

RJ45 Communication Interface

Information regarding the RJ45 interface for digital signals, potentially for power reduction or disconnection.

Load Shedding Connection

Explanation of dry-contact inputs for load shedding, detailing how charging power is reduced based on input signals.

Charging Mode Configuration

Details on setting charging modes (Free Charge or RFID) via switch positions.

Rotary Switch Current Settings

Table outlining maximum charging current settings corresponding to rotary switch positions 0 through 7.