9
Step 2. Enter 55 . The keypad will give a long beep,
transmit a RF signal about 10 seconds.
Program the keypad to the gate opener.
Step 1. Enter programming protection passcode 8888 .
The keypad will sound a long beep and its blue backlight lights up.
Factory default, the function of channel 1 and channel 2
are same as your remote button 1 and button 2. Such as,
channel 1 only control the single swing gate, the channel 2
will control the double swing gates.
This keypad includes an anti-spying mode. To prevent your
passcodefrom being spied on, follow the steps below.
Step 3. Power on your gate opener, press the “Learn” button
on the control board. If the control board’s digital display show
a number, its indicator LED flash four times and sound a buzzer.
That means the keypad already be programmed with your gate
opener, then exit the mode automatically.
● Operate the keypad to control the gate opener
For this example, we will use 5555 as channel 1 passcode,
6666 as channel 2 passcode.
Step 1. Power on the gate opener.
Step 2. Enter 5555 , the single gate will be opened.
Step 3. Enter 6666 , the double gates will be opened.
1. Press any numerical buttons (0-9) of the keypad and include
your passcode in the right order.
2. Press . The keypad will automatically sort out your
passcode and control the gate opener.
3. Such as, enter 1234567895555 , the gate opener will be
activated.
To Next Page
Loading...