10
● Reset the entry passcode
If you forgot your entry passcode, follow the steps below to
reset the entry passcode for channel 1 and channel 2.
Step 2. Enter 00 . The keypad will sound a long beep followed
by a short beep, confirm all the entry passcode have
been deleted.
Step 1. Enter programming protection passcode 8888 . The
keypad will sound a long beep and its blue backlight
lights up.
Now factory default the passcode 1111 for channel 1,
2222 for channel 2.
Mind that the muting only applies to normal operation.
When in programming, the keypad stil beeps to
indicate/confirm your operations. After being reset, the
keypad beeping will resume Change it if needed.
● Muting or Unmuting the buzzer
Step 1. Enter programming protection passcode 8888 .
The keypad will sound a long beep and its blue
backlight lights up.
Step 2. Enter 36 . The keypad will sound a long beep
followed by a short beep, the mute operation has been
saved.
● Turn on or off the backlight
Step 2. Enter 39 . The keypad will sound a long beep
followed by a short beep, the tutn off the backlight
operation has been saved.
Step 1. Enter programming protection passcode 8888 .
Keypad will sound a long beep and its blue backlight
lights up.
To Next Page
Loading...