7
7. Slide the keypad back in, being sure the end with an
interlock.
8. Presses against the interior of the cover. Replace the
cover locking bolt and secure the keypad.
Operation
The channel 1 passcode is 1111
The channel 2 passcode is 2222
The programming protection passcode is 0000
Factory set all passcode are four(4) digits in the length.
Enter 4 digits passcode and end with or , that is
activating the keypad.
● Programming protection passcode setting
For this example, we are going to use 8888
Step 2. Enter 69 . The keypad will sound a short beep.
Step 1. Enter 0000 . The keypad will sound a long beep and
its blue backlight lights up.
To Next Page
Loading...