Need help?Do you have a question about the JUKI DDL-5550 and is the answer not in the manual?
General| Machine Type | Industrial Sewing Machine |
|---|---|
| Max Sewing Speed | 5, 500 stitches per minute |
| Max Stitch Length | 5mm |
| Needle Bar Stroke | 30.7mm |
| Lubrication | Automatic |
| Feed Mechanism | Drop feed |
| Lift of the Presser Foot | 5.5mm (by hand), 13mm (by knee) |
| Type | Lockstitch |
| Hook | Full rotary hook |
| Stitch Type | Lockstitch |
| Needle | DB x 1 (#11-#18) |
| Weight | 28 kg (machine head only) |
| Motor | Clutch motor or Servo motor (varies by setup) |
Details on how to install the oil pan onto the machine table.
Instructions for attaching the machine head to the table's hinge.
Details on filling the oil pan and checking oil level and splashing.
How to adjust oil flow to the thread take-up and needle bar crank.
Procedure for adjusting oil supply to the hook.
Procedure for adjusting the tension of the needle thread.
Procedure for adjusting the tension of the bobbin thread.
Adjusting the length of thread pulled by the thread take-up spring.
Adjusting the tension of the thread take-up spring.
To Next Page
