To Next PageTo Next Page
Need help?Do you have a question about the JUKI DDL-555-2 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Needle Type | DBx1 |
| Motor Type | Clutch Motor |
| Maximum Sewing Speed | 5, 500 rpm |
| Motor | 1/2 HP Clutch Motor |
Details the procedure for adjusting the clutch gap to ensure proper operation and prevent damage.
Essential safety precautions and operational guidelines before starting the machine.
Explains the four-stage functionality of the sewing machine pedal for different sewing modes.
Detailed guide on adjusting the thread tension using the first and second tension discs.
How to adjust the needle's stopping position after thread trimming for optimal results.
Adjusting the timing of the thread trimming cam for proper thread length after trimming.
Setting the correct position of the moving knife for effective thread scooping and cutting.
Correct method for installing the fixed knife, including distance and angle adjustments.
Instructions on how to properly sharpen the fixed knife blade for optimal cutting performance.
Adjusting the bobbin thread presser for correct interaction during thread trimming.
Guidance on identifying and correcting electrical issues encountered during machine operation.
Troubleshooting steps for issues causing stitches to skip at the beginning of sewing.
Diagnosing and fixing problems where needle thread slips out after trimming or during sewing.
Correcting poor thread tension that occurs when beginning to sew.
Troubleshooting cases where the needle thread is not cut properly, often related to bobbin thread.
